高电压值小电压电流校正仪（耐电弧放电校正仪）-（来微机操纵）

High voltage low current tester (arc resistance tester) - (computer control)

类产产品名号：耐电弧试验机

Product name: electric arc resistance tester

企业产品应用：NDH-A

Product model: NDH - A

满意准则：GB/T 1411-2002《固状绝缘带资料耐高低平感应电流脉冲释放的可靠性试验》（等同于IEC  61621-1997）及ASTM D495等标准单位的追求设计方案手工制造的，并合适IEC 149、UL 746A等试验报告方案

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

最主要使用使用范围及基本功能：

本实验室检测机是按软件应中用无刷电机、电热器设备和家庭供电热器设备等互联网行业的安装电工用橡胶、硅胶粘合剂胶和耐压电阻漆等耐压电阻的材料的耐电孤稳定性认定，主中用固态垃圾耐压电阻的材料如：橡胶、塑料膜、硅胶粘合剂、云母片、陶瓷厂家、夹层玻璃、耐压电阻油、耐压电阻漆、纸壳等导电介质的耐电孤稳定性检测；

本科学试验设计机由运算机的控制作业，都可以展示如今工作科学试验方式及科学试验时，科学试验终止后并维持如今工作科学试验统计资料，并可缩印.标准单位工作统计。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 超声波焊接机为上一体化结构设计，顶部为方法程序，顶部为校正箱。

2 本好产品主要采用*新智力把握技能，在选取应用程序（IEC或ASTM）可主动做疲劳试验，并在手机上信息显示可靠性试验的过程 和然而。

3 **能很好，抗骚扰功能强，检测精密性强。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧放电通断时光粗差：不大于 ±10ms

2 调压器数量：2kVA

3 功率试验报告交流电压：12.5kV

4 测试额定电压gps精度：±3%

5 电压调控可靠性强，精密度：±10%  功率估测可靠性强，精密度：1.5%

6 金属电极对钢材拉伸试验压为：（0.5±0.05）N

7 参比电极产品：钨棒

8 电级高度：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 动用生活环境温：（23±2）℃

10 用到生活环境对空气相对湿度的：（50±5）%

11 电源适配器：220V±5%  50Hz  10A

12 实验    方法步骤：   国家标准下载/美标/10 mA 维持/20 mA 维持/30 mA连续不断/40 mA多次

13 耐压程度相应：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 物品尺寸：

NDH-A    耐脉冲实验仪-微机掌握

NDH-B    耐电孤试验装置仪-触碰屏掌控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！